Pt100 Temperature Sensor Input Module (PTI)

Pt100 Temperature Sensor Input Module (PTI)



EN 50126
EN 50128
EN 50129
EN 50155
EN 45545

Dimensions (W x H x D):
4 TE x 3 U x 160 mm
160 g
Input Power:
5 V DC ± 5 % (310 mA typ., 400 mA max.)
Temperature Range (operational):
-40 °C…+70 °C
MTBF (40 ºC ambient temperature):
1 580 000 h (PTI2037A)
I/O Connector:

DIN41612-F48 (at front)
Host Interface:
RS 485
Input Channels:

6 Pt100 sensor
Connection Type:

2-wire, 3-wire or 4-wire
Measurement Range:
-110 ºC to + 325 ºC

0.01 ºC
Better than ± 1 ºC (3- or 4-wire)

module functions

The Trainnet® PTI module is a PT-100 temperature sensor input module. It acquires the signals from the PT-100 temperature sensors (resistance measurement) and converts them into temperature values expressed in degrees Celsius. The PTI module makes the measured temperature values available to the train computer's CPU.

The Trainnet® PTI can be used as a part of a Trainnet® TCMS, VCU or Event Recorder.Alternatively, the Trainnet® PTI can be fitted in the Trainnet® Remote I/O Module (RIOM).

key features

The Trainnet® PTI has six PT-100 measurement channels which can measure temperature within the -110 to +325 °C range with over range indication. Each channel is isolated from each other, thus a fault in one channel will not affect the others. PT-100 temperature sensors can be connected using 2-wire, 3-wire or 4-wire schemes providing flexibility.

The measurement resolution is 0.01 °C, with accuracy better than ±1 °C within the measurement range.

The module has its own 32-bit embedded processor that uses factory calibration values to convert measurement values to degrees Celsius with the best possible accuracy. The embedded processor also implements diagnostic functions and reports to the train computer's CPU module if it suspects that the input values cannot be trusted. The Trainnet® PTI detects the temperature sensor as well as cable faults and input channel faults.

Published on: 2017-07-12
EKE-Electronics Ltd
Piispanportti 7
02240 Espoo
Tel +358 9 6130 30